Brass Eagle T-Storm Paintball gun barrel threading?
OK, so recently won the bronze eagle t storm paintball gun and I want to upgrade barrel, does anyone know what type of screw you have?? Thanks in advance
It means accepting Spyder threaded barrels, but I've never been near knowledge this with certainty. Edit. A 40 "barrel?! What the hell are you smoking? There is no such term in paintball and even if there would be reduced drastically the efficiency of its gas. I'm talking about 1100 shots go 20 oz of 500 shots from the same 20 oz. It would also be very difficult to run and be manageable with about 3 meters and a barrel and a half. There are also barrels much better than the Stryker for $ 30. Look at J & J ceramic barrels. The Stryker also has Spyder barrel threads for this confirms that the BE is using Spyder threaded barrels. 21''de make barrels, but are not more accurate than 8'', 12'', 14''. 16'', or of any length. The key to accuracy is paint quality (no dimple), a good quality barrel hole, a good paint to bore match, and consistency of gas. J & J are very good for the price, but I do not recommend getting one of more than 14 ".
Brass Inserts installed using Heat
|
|
Brass threaded 3/4″ tap connector £2.00 |
|
|
Brass Threaded / Push On Hose Connector £2.50 |
|
|
BRASS TAP ADAPTOR 3/4″ THREADED FOR HOSE/TAP (GA126) £1.49 |
|
|
VINTAGE LEVIS PINK SUEDE ANTIQUE BRASS THREADED 34 BELT £4.95 |
|
|
¾” THREADED BRASS TAP ADAPTOR £1.19 |
|
|
Brass M-F threaded hex spacer,M3×12mm Pack of 40 £60.00 |
|
|
Brass BC (B22) Switched Lampholder 1/2″ Threaded Base £3.45 |
|
|
BRASS MALE UNION TYPE FITTING THREADED & SOLDER – 42mm £10.00 |
|
|
CK Brass Interlock Hose Threaded Tap Connector 1/2″ £3.20 |
|
|
DRAIN COCK 1/2″ HEAVY DUTY, THREADED. BRASS. COCKS £4.99 |
|
|
3/4″ Brass Threaded Tap Connector £1.95 |
|
|
MECCANO PART NO 115 THREADED PIN BRASS/ BRONZED PRE WAR £1.45 |
|
|
1/2″ BSP THREADED BRASS SOCKET £2.25 |
|
|
Adapter For Non-Threaded Arbors Female Brass 5/8″-11th £6.37 |
|
|
BRASS TAP ADAPTOR 3/4″ THREADED OUTSIDE HOSE BIB TAP £1.99 |
|
|
C K CEKA 7915 BRASS 3/4″ THREADED TAP CONNECTOR £3.69 |
|
|
Ford Model A 1928 to 1929 Radiator brass neck threaded £38.50 |
|
|
4 BA Brass Threaded Bar Rod 4BA Studding x12″ Long £4.95 |
|
|
6 BA Brass Threaded Bar Rod 6BA Studding x12″ Long £6.95 |
|
|
8 BA Brass Threaded Bar Rod 8BA Studding x12″ Long £9.49 |
|
|
1 BA Brass Threaded Bar Rod 1BA Studding x12″ Long £7.50 |
|
|
10 BA Brass Threaded Bar Rod 10BA Studding x12″ Long £11.50 |
|
|
M8 Threaded Brass Rod 150mm length £3.75 |
|
|
¾” THREADED BRASS TAP ADAPTOR £0.99 |
|
|
1″ X 3/4″ BSP THREADED BRASS REDUCER COMPRESSION £2.45 |
|
|
NEW 25 x Brass F-F threaded hex spacer,M4×25mm £9.99 |
|
|
NEW 50 x Brass F-F threaded hex spacer,M3×17mm £9.99 |
|
|
NEW 50 x Brass F-F threaded hex spacer,M3×22mm £9.99 |
|
|
NEW 50 x Brass F-M threaded hex spacer,M3×35mm £18.75 |
|
|
NEW 50 x Brass F-F threaded hex spacer,M3×17mm £9.99 |
|
|
3/4″ THREADED BRASS TAP ADAPTOR HOSE TAP CONNECTION £1.49 |
|
|
Adapter For Non-Threaded Arbors Female Brass 5/8″-11th £6.37 |
|
|
Brass 4 way tap manifold threaded end outlets for timer £25.00 |
|
|
Aged brass hollow tube 4″ with threaded ends (BB68) £6.82 |
|
|
Aged brass hollow tube 8″ with threaded ends (BB69) £10.11 |
|
|
1″ X 1/2″ BSP THREADED BRASS REDUCER COMPRESSION (NEW) £1.99 |
|
|
M6 Threaded Bar Rod Studding – Pack of 3 – Brass 6mm £6.00 |
|
|
M6 Threaded Bar Rod Studding – Pack of 3 – Brass 6mm £6.50 |
|
|
M6 Threaded Bar Rod Studding – Pack of 3 – Brass 6mm £7.00 |
|
|
M6 Threaded Bar Rod Studding – Pack of 3 – Brass 6mm £7.50 |
|
|
1/2″ BSP THREADED BRASS SOCKET (new) £2.20 |
|
|
CK WATERING BRASS THREADED CONNECTOR G7915 50 £3.99 |
|
|
CK WATERING 3/4″ BRASS THREADED CONNECTOR G7915 75 £3.99 |
|
|
1″ X 1/2″ BSP THREADED BRASS REDUCER COMPRESSION £2.49 |
|
|
¾” THREADED BRASS TAP ADAPTOR £1.19 |
|
|
5 x PRIMUS STOVE BRASS JETS . THREADED BRASS JET NIPPLE £10.00 |
|
|
3/4 ” INCH THREADED BRASS TAP ADAPTOR CONNECTOR £2.41 |
|
|
3/4″ BSP THREADED BRASS TAP ADAPTOR HOSE CONNECTOR £3.25 |
|
|
2 BA Brass Threaded Bar Rod 2BA Studding x12″ Long £4.65 |
|
|
CK Brass Interlock Hose Threaded Tap Connector 3/4″ £3.60 |
|
|
DRAIN COCK 1/2″ TYPE A, THREADED. BRASS. COCKS £1.99 |
|
|
NEW 40 x Brass F-M threaded hex spacer,M3×35mm £9.99 |
|
|
Brass Threaded Adaptor For Microphone 3/8″ Int 5/8″Ext £0.99 |
|
|
M8 Threaded Brass Rod 100mm length £2.99 |
|
|
¾” THREADED BRASS TAP ADAPTOR £0.99 |
|
|
CK 5/8″ Brass Threaded Tap Connector Garden Hose, G7915 £3.25 |
|
|
CK 1/2″ Brass Threaded Tap Connector Garden Hose, G7915 £2.23 |
|
|
CK 3/4″ Brass Threaded Tap Connector Garden Hose, G7915 £2.63 |
|
|
Perma-Lok Leather Craft Brass Lacing Needle threaded UK £14.99 |
|
|
Jumbo Perma-Lok Leather Brass Lacing Needle threaded UK £15.99 |
|
|
Brass Threaded Hubcaps & axle Set MAMOD TE1a Live Steam £7.85 |
|
|
M2 THREADED BRASS RODS 1 INCH/25MM LONG PACKED IN 4’s £1.20 |
|
|
5mm BRASS THREADED INSERTS PACKED IN 5’s £2.95 |
|
|
NEW 200 x Brass F-F threaded hex spacer,M3×22mm £43.50 |
|
|
NEW 200 x Brass F-F threaded hex spacer,M3×10mm £39.50 |
|
|
NEW 100 x Brass F-M threaded hex spacer,M3×35mm £21.99 |
|
|
NEW 200 x Brass F-F threaded hex spacer,M3×17mm £43.50 |
|
|
New CK G7918 Dual Brass Two Way Threaded Tap Connector £16.95 |
|
|
3/4 Threaded Tap Adapter £4.99 Standard quick fix compatible format Made From Solid Brass 3/4″ BSP Thread… |
|
|
Brass Threaded Adaptor For Microphone Stands With 3/8in Internal Thread and 5/8in External Thread £0.50 A brass threaded adaptor for mic stands. Internal thread M12 x 1 (3/8 ). External thread M16 x 1 (5/8 )…. |
